The magnetic valve of the pad printing machine will have a service life, so it will be broken when the solenoid valve is used for a certain number of years, but what are the signs when it is broken? It may be a certain action of the pad printing machine, which can not run, then we will replace the solenoid valve.

Pad printing machine should also pay attention to some matters in the process of use, which can increase the service life of the solenoid valve. For example, when you are off work or on holiday, pull out the trachea in this way, you can effectively remove the water inside the trachea, so that it may not cause the sealing ring inside, because of the water and aging in advance.

Pad printing machine also has certain requirements for the use of the environment, can not be used in the workshop where the dust is too large, so the pad printing machine magnetic valve may also enter the dust, the dust is also conductive, which may be a short circuit of the solenoid valve, and it will have a great impact on the effect of printing.

It can not be used in a very humid environment, the use of pad printing machine, which may greatly shorten the service life of the whole machine, and greatly reduce the life of the spare parts inside.

The use of the machine in a good use environment is very important for the effect of product printing and the machine of the pad printing machine, which can improve the life of the machine and spare parts a lot.

There is also a situation that will cause harm to the pad printing machine magnetic valve, when selecting the equipment, it is also necessary to consider its working environment, if it is in a place that will produce a large chemical reaction, it should be preferred to corrosion-resistant equipment,

This is because different equipment has its own characteristics, do not mix, otherwise it will affect its service life, installation must be correct, the corresponding arrow points to the installation, and the direction of the medium should be maintained.

There can be no reverse pressure difference, so as not to start normally. To keep the pipe clean, there can be no hard objects and other impurities, otherwise it will cause the machine to stall and not work, you can install a filter in front of the machine, so it will be easier. Voltage should also pay attention to ensure that the voltage is stable when working, and if it is not stable, voltage regulation measures can be taken.